Product number : GB10

KEY FEATURES

• Supervised glass break sensor ( sends a self checking signal every 90 minutes).

• Uses full 16 bit Code for RF transmission.

• Battery operated with low battery detection.

• Dual technology for maximum reliability.

TECHNICAL DATA

Batteries: 2 x AAA

Operating life: 2 years using alkaline batteries

RF frequency: 433.92 MHz

Radiated output: < 5833 µV/m @ 3m

RF operating range: 30 m (open field)

Code for RF transmission: 16 bit (65536 different codes)

Approvals: ETS 300220 - CE Mark

Ambient temperature:- 10° C to + 50° C (operation) - 20° C to + 70° C (storage)

Dimensions: 53 x 75 x 22 mm  (width x height x depth)

 

 

BENEFITS

The GS10 glass break sensor works with any X-10 security system. The sensor is stick on the glass, detects the vibrations of the glass and listens for the glass breaking high frequency. It sends a wireless radio frequency signal to the main console when a glass is broken or hit by a hammer. This dual technology ensures the glass break sensor is not tricked by other noise.

When the system is armed, the alarm is tripped when a glass is broken. A slide switch on the front of the glass break sensor lets you select the sensitivity.

The sensor sends a "self-checking" transmission approximately every 90 minutes. The console will not arm if a glass break sensor hasn't reported in (can be overdriven by pressing the console's Accept Button).